Custom Directional Inlay Vinyl Flooring for Australian Childcare Project

Project

Home
Project
Project Info

Custom Directional Inlay Vinyl Flooring for Australian Childcare Project

Project Overview

Project Name: Custom Directional Inlay Flooring Childcare Project
Location: Australia
Product Used: 2.0mm Heterogeneous Commercial Vinyl Flooring with 0.3mm Wear Layer and Custom Inlay Design
Application Areas: Corridors, playrooms and learning zones

Project Details Designing flooring for educational and childcare environments requires a careful balance of safety, durability, hygiene and visual appeal. For this Australian childcare project, we supplied a customized heterogeneous vinyl flooring solution featuring colorful directional inlays.

The precision-cut inlaid patterns create a bright and engaging interior while also helping guide foot traffic and visually separate different learning and activity zones.

Key Project Highlights:

Custom Inlay Design: Advanced cutting and inlay techniques were used to create colorful directional patterns for navigation, zoning and interior decoration.
Tested Slip Resistance: The flooring achieved slip-resistance test values of 0.52 under dry conditions and 0.55 under wet conditions, helping provide a more secure walking surface in active childcare environments.
Health-Conscious Material Performance: The flooring was tested according to GB 18586-2001. Cadmium, lead and vinyl chloride monomer were not detected in the corresponding tests.
Commercial Durability: The 0.3mm wear layer, T-grade wear-resistance performance and 0.02mm residual indentation make the flooring suitable for regular commercial foot traffic.
Easy Cleaning and Maintenance: The flooring demonstrated excellent stain and chemical resistance. A UV stain-resistant surface treatment is available, while antibacterial and povidone-iodine-resistant surface treatments can be customized.

EN/ISO Technical Parameters

Standard	Test Item	Test Result	Assessment
ISO 24346:2006 (R2015)	Overall Thickness	2.0 mm	Pass
ISO 24346:2006 (R2015)	Wear Layer Thickness	0.3 mm	Pass
ISO 24341:2006 (R2015)	Length	20 m	Pass
ISO 24341:2006	Width	2 m	Pass
ISO 24343-1:2007	Residual Indentation	0.02 mm	Pass
ISO 23999:2021	Dimensional Stability and Curling After Exposure to Heat	0.00%	Pass
ISO 26987:2008	Stain and Chemical Resistance	Excellent	Pass
ISO 8301:1991/Amd.1:2010	Thermal Conductivity	0.049 W/(m·K)	Pass
ISO 8301:1991/Amd.1:2010	Thermal Resistance	0.041 m²·K/W	Pass
EN 1815:2016, Method A	Antistatic Performance	0.22 kV	Pass
BS EN ISO 105-B02:2014	Color Fastness to Light	> Grade 6	Pass

GB/T Technical Parameters

Standard	Test Item	Test Result	Requirement / Assessment
GB/T 11982.1-2015	Overall Thickness	2.0 mm	Pass
GB/T 11982.1-2015	Wear Resistance – Volume Loss	1.5 mm³	T Grade: ≤2.0 mm³
GB/T 4100-2006	Slip Resistance – Dry Condition	0.52	Reference: 0.41
GB/T 4100-2006	Slip Resistance – Wet Condition	0.55	Reference: 0.44
GB 8624-2012	Fire Resistance	Flame-Retardant Material	B1
GB 18586-2001, Clause 5.5	Volatile Matter Content	16.4 g/m²	Pass
GB 18586-2001, Clause 5.4	Soluble Cadmium Content	Not Detected	Pass
GB 18586-2001, Clause 5.4	Soluble Lead Content	Not Detected	Pass
GB 18586-2001, Clause 5.3	Vinyl Chloride Monomer Content	Not Detected	Pass
Surface Treatment Requirement	UV Stain-Resistant Surface Treatment	Available	Customizable
Surface Treatment Requirement	Antibacterial and Povidone-Iodine-Resistant Treatment	Available by Customization	Customizable

Technical Note: The above data apply to the tested 2.0mm heterogeneous vinyl flooring with a 0.3mm wear layer. Technical values may vary according to the selected color, surface treatment, product specification and production batch. Final performance should be confirmed by the approved sample, signed technical data sheet or corresponding test report.